Impulse 7205e - Manual (Page 26)

ƒ On the ‘Port Information’ tab, select the COM port you want to test and
click on the ‘Open’ button. (See image below)
ƒ Click the ‘Settings’ button to open the COM Properties menu. Change
your parameters to 9600 bits per second, 8 data bits, no parity, 1 stop bit,
and no flow control, as pictured below.
ƒ Click ‘Apply’ and ‘OK’.
© Sealevel Systems, Inc. - 24 - COMM+2.LPCIe User Manual