Impulse 3088 - Manual (Page 9)

Technical Description
Sealevel Systems DUOCOM: Page 6
Installation
Operating System Installation
For Windows Users
Start by choosing Install Software at the beginning of the CD. Choose
Asynchronous COM: Port Software, SeaCOM.
Other Operating Systems
Refer to the appropriate section of the Serial Utilities Software.
System Installation
The DUOCOM: can be installed in any of the PC expansion slots, but to access
the ‘AT’ or (E)ISA IRQs (10 - 15) it must be installed in one of the 16 bit slots.
The DUOCOM: contains several jumper straps for each port which must be set
for proper operation prior to installing the adapter into the computer.
1. Turn off PC power. Disconnect the power cord.
2. Remove the PC case cover.
3. Locate an available slot and remove the blank metal slot cover.
4. Gently insert the DUOCOM: into the slot. Make sure that the adapter is
seated properly.
5. Replace the screw.
6. Replace the cover.
7. Connect the power cord.
Installation is complete.