Laurel Electronics LT SERIES TRANSMITTERS ANALOG INPUT - Manual (Page 12)

- 12 -
Click on the Communication tab to view the communication parameters that you used to
establish default communications with your transmitter. You can reselect Baud Rate , Device
Address , Serial Protocol , and Full/Half Duplex , even though you may have selected different
values to establish initial communications with your PC.
Click on the Analog Out tab to scale your analog output, which is standard. Under Range ,
select 0-20 mA Current , 0-10V Voltage , or 4-20 mA . Type in your Lo Range Reading and Hi
Range reading . These will create the two endpoints of your analog output range. For detailed
help on any data entry field, select that field and press on the F1 key.