Laurel Electronics LTE SERIES TRANSMITTERS PULSE INPUT - Manual (Page 13)

- 13 -
To reach the above Input+Display tab screen, follow this procedure:
1) Highlight your device under the Device Discovery tab.
2) Click on the Main Menu button. A new Counter Main Menu window will open with a help
screen. Click on Counter in the top menu bar. Our pulse input transmitters and counters use
the same software. While a scaled digital reading is not displayed by transmitters, it is used
internally.
3) Click on Get Setup to retrieve the setup data currently in the transmitter.
4) Click on View => Setup to reach the above setup window with five tabs.
The Input+Display tab is used to set up Signal Input Mode , Signal Input Function , Gate Time ,
Time Out , Display Type , Display Filter , Power-On Total , and the interpretation of Control Inputs
1 and 2. Press the F1 key for help with highlighted items. This applies to this screen and to all
other IS screens.
This sample screen is for the dual pulse input signal conditioner. The actual screen will be for
the detected signal conditioner, and later screens will vary depending on selections made in this
screen.