Laurel Electronics LTE SERIES TRANSMITTERS PULSE INPUT - Manual (Page 14)

- 14 -
Click on the Scaling tab to scale your transmitter. The actual screen will vary depending on the
detected signal conditioner board, signal input and signal function, as selected under the
Input+Display tab. Press the F1 key for help with highlighted items.
Click on the Filter tab to set to set up filtering for your readings. The filter time constant can be
automatic, be specified in seconds, or be turned off. The adaptive threshold modifies the time
constant in response to noise. A low adaptive threshold is recommended for normal low noise.
A high adaptive threshold is recommended for high noise environments. Press the F1 key for
help with highlighted items.