Laurel Electronics LAUREATE SERIES 2 COUNTER-TIMER-SERIAL INPUT METER - Manual (Page 30)

30
Scale multiplier for combinations of two channels (e.g., AxB, A/B) if selected under _ InPut
rESoLn .
Resolution
Flashing 6-digit number
in decade steps from
0.00001 to 100000
Press to select. This is a multiplier R to avoid
overflow or underflow of arithmetic combinations of
Channels A and B.
Quartz crystal time base calibration
_CALib Time base calibration. Do not change. See Calibration section of manual.
Option dependent menu items
SourcE AL SEt . AL S34 dEUn1H dEUn2H dEUn1b dEUn2b dEUn3H DEUn4H DEUn3b
DEUn4b Menu items related to alarm setup These will only appear if a relay board is
detected. If so, please see Section 14.
An_SEt An_Lo An_Hi or An_SEt An_Lo1 An_Hi1 An_Lo2 An_Hi2 Menu items
related to analog output. These will only appear if a single or dual analog output board is
detected. If so, please see Section 15.
_SEr_1 _SEr_2 _SEr_3 _SEr_4 Menu items related to serial communications. These will
only appear if an RS232 or RS485 I/O board is detected. If so, please see Section 16.
Menu lockout items
_Loc_1 _Loc_2 _Loc_3 _Loc_4 Menu items used to enable or lock out (hide) other menu
items. Loc menu items may be locked out by a hardware jumper. Please see Section 9.
* See Glossary for explanation of item.