Lectrosonics UH110 - Manual (Page 2)

INTRODUCTION
Thank you for selecting the Lectrosonics UH110 frequency agile, plug-on transmitter. The
UH110 combines over 80 years of engineering experience with the very latest components, in a
design that addresses the most demanding professional applications.
The design of the UH110 was the direct result of numerous conversations with users, staging and
touring companies and dealers across the US. The specific concerns and needs brought up in
these conversations led directly to the development of the operational features offered on the
UH110. Two hundred fifty six frequencies are user selectable to alleviate interference problems
in travelling venues.
The UH110 is a rugged, machined aluminum package. Phantom power is provided on pins 2 and
3. Level indicating LEDs are provided to make level settings quick and accurate, without having
to view the receiver. The battery compartment accepts any 9 Volt alkaline or lithium battery and
makes a positive connection via self-adjusting contacts.
Only the UH110 transmitter is covered in this manual. Companion receivers are covered in
separate manuals. The UH110 will operate with any 110 Series Lectrosonics receiver in the
same frequency group.
TABLE OF CONTENTS
INTRODUCTION ..................................................................................................... 2
GENERAL TECHNICAL DESCRIPTION ................................................................ 3
CONTROLS AND FUNCTIONS .............................................................................. 4
OPERATING INSTRUCTIONS ............................................................................... 5
OPERATING NOTES .............................................................................................. 5
ADJUSTING THE TRANSMITTER FREQUENCY ................................................. 5
TROUBLESHOOTING ............................................................................................ 6
BATTERY REPLACEMENT .................................................................................... 6
SPECIFICATIONS AND FEATURES ..................................................................... 8
SERVICE AND REPAIR .......................................................................................... 9
RETURNING UNITS FOR REPAIR ........................................................................ 9
WARRANTY ........................................................................................... Back cover
2