Lectrosonics HBATELIM - Manual (Page 4)

A closer look
Specifications
Input: ¨ Minimum-11V DC
¨ Nominal-12V DC
¨ Max-24V DC with most Lectro
transmitters
¨ Max14V DC with UM250B high
power transmitter (see formula below)
Output: 9V DC regulated
Height: 0.662 inches
Width: 1.781 inches
Depth: 0.970 inches
Weight: 14.8 grams
*Formula for figuring voltage for the 12 volt adaptor interface
if 12V is not available. Note: Max of 14V for UM250B; all
others—24V max
(Vin - 9V) X Current = wattage
(wattage must be less than 1 watt)
EXAMPLE:
14. 4 volt supply and a transmitter drain of 100 mA (0.1A)
then:
(14.4V-9V) X 0.1A = 0.54 watt
Since this is less than 1 watt, this is OK.
BATELIM-0701
9 volt contacts
for battery
eliminator
modified door for
MBATELIM Belt-Pack
transmitters
12 volt input jack
for battery
eliminator
center pin (+)
modified door for
HBATELIM Plug-
On transmitters
581 Laser Road NE - Rio Rancho, NM - 87124 USA
tel (505) 892-4501 or (800) 821-1121 - fax (505) 892-6243
Web: www.lectrosonics.com - E-mail: [email protected]