Lectrosonics DNTBOB 88 - Manual (Page 6)

ASPEN Digital Processor
LECTROSONICS, INC. 6
Connector Panel
Power
Inlet Jack
Power Cord
Strain Relief
Balanced Analog
Audio Outputs
Primary Secondary
Dante Ports
Balanced Analog
Audio Inputs
Power LED
Power Supply
An external power supply is furnished with the break-
out box.
Lectrosonics
part number
40094 power
supply
The LED next to the inlet jack on the connector panel
glows to indicate power is ON.
Balanced Analog Audio Inputs
Floating balanced line level inputs; 0dBu level with
20dB headroom.
Balanced Analog Audio Outputs
Floating balanced line level outputs; 0dBu level with
20dB headroom.
Dante Ports
Either port can be used with a single network connec-
tion when the unit operates in the Switched mode.
When a second network is configured for redundancy
using a separate cable system, all processors connect-
ed to the network must have consistent connections
– all Primary ports connected to one network and all
Secondary ports connected to the other network.
About Dante Software
Dante Controller
This software is needed to route network audio signals
between the SPNDNT and other nodes on a Dante
network. The software is downloaded from the Audi-
nate web site and will run on Windows and Mac plat-
forms. Windows requires Bonjour Print Services from
Apple Corporation.
Dante Controller is
used to assign the
transmit and receive
signals between
multiple Dante
devices. When a
device is set to
receive a signal from
another device that
is transmitting, it is said to subscribe to the transmit-
ted signal. These subscriptions appear in the Dante
Controller window as highlighted green check marks.
Browser based Help Files are provided to explain vari-
ous icons and setup tabs.