Connection options, Stand-alone connections, Daisy chained directly – Lectrosonics DNTBOB 88 User Manual
Page 8
Advertising
ASPEN Digital Processor
LECTROSONICS, INC.
8
Stand-alone Connections
Multiple BOB 88 units can be connected directly to one
another without an Ethernet switch to form an isolated
Dante network between them. This requires that all
units be set to the
Switched mode.
Simply connect the units with CAT-6 cable in a “daisy
chained” manner. A PC can be connected at either
end of the chain to setup the channel assignments and
signal routing.
Analog Audio Source
Analog Audio Destination
Analog Audio Source
Analog Audio Destination
Analog Audio Source
Analog Audio Destination
Analog Audio Source
Analog Audio Destination
Daisy Chained Directly
Advertising