Level Mount LM30SW - Manual

Installation Instructions
www.LevelMount.com
24-7 Help Desk Line
1-888-229-1459
©2008 Level Mount
Patents Pending
VESA 200 X 100 Low Profile - Model:
ELSFW-01, LM30SW, DC30SW
DO NOT RETURN THIS PRODUCT TO THE STORE OR WEB
SITE YOU PURCHASED IT FROM!
IF YOU BELIEVE THIS MOUNT IS DEFECTIVE, HAS
MISSING OR BROKEN PARTS, OR IF YOU ARE HAVING
DIFFICULTY INSTALLING THIS MOUNT TO YOUR WALL
OR FITTING YOUR TV, PLEASE CONTACT OUR COMPANY,
LEVEL MOUNT, DIRECTLY.
Dial 1 888 229 1459 or email us at CustomerSupport@
ElexaUSA.com any time of the day or night for a quick and
efficient solution to your problem.
Our trained Customer Service Department is open 24 hours
a day, 7 days a week, every day of the year and is prepared
to assist you in both English and Spanish.
Please also visit our Web Site at www.LevelMount.com
for assistance.
CAUTION:
Installer must make sure the LCD/Plasma Wall Mount
is properly and securely attached and that appropri-
ate fasteners are used. It is the responsibility of the
installer to verify that the mount is anchored properly
to the wall.
PLEASE NOTE: THE MOUNT MUST BE ATTACHED
TO WOOD STUDS OR TO PROPERLY INSTALLED
PLASTIC ANCHORS IN MASONRY OR CONCRETE.
DO NOT MOUNT ONLY TO DRY WALL.
Before installing check to make sure all parts of the
mount are included.
Make sure all screws and bolts are tightened before
allowing Wall Mount to bear the full weight of the
Plasma/LCD.
Features:
• Integrated Bubble Level
• Easy 2 Piece Mounting
• Low Profile Design
• Stud Finder Included
Mounting Hardware Included:
Bag REF
Description QTY
1 A Phillips M4 x 12 Bolt 4
B Phillips M4 x 20 Bolt 4
C Phillips M4 x 30 Bolt 4
D M4 Lock Washer 4
2 E Phillips M5 x 12 Bolt 4
F Phillips M5 x 20 Bolt 4
G Phillips M5 x 30 Bolt 4
H M5 Lock Washer 4
3 I Phillips M6 x 12 Bolt 4
J Phillips M6 x 24 Bolt 4
K Phillips M6 x 35 Bolt 4
L M6 Lock Washer 4
4 M 3/4’’ Spacer 4
5 N 2.5’’ Wood Screw 2
O Concrete Anchor 2
Tools required for attachment to stud:
Stud Finder
1/16’’ Drill Bit
Tools required for attaching to concrete:
Electric drill
2/5’’ (10mm) Masonry Bit
DETERMINE CORRECT BOLT
Caution: Carefully thread the bolt into the back of your
LCD to determine which bolt is to be used. If there is any
resistance remove the bolt immediately.
ATTACH TO TV
ATTACH TV TO WOOD STUDS
Locate stud with Stud Finder
(See manual included)
ATTACH TV TO CONCRETE
SLIDE TOGETHER
English
1
2
3a
3b
4
(USE SPACER ONLY
IF NEEDED)
N
N
LOCK WASHER
BOLT