Level Mount DC42SM - Manual

English
Motorized Full Motion LCD/Plasma Wall Mount - SMM-08, LM42SM, DC42SM
Installation Instructions
DO NOT RETURN THIS PRODUCT TO THE
STORE OR WEB SITE YOU PURCHASED IT
FROM!
IF YOU BELIEVE THIS MOUNT IS DEFECTIVE,
HAS MISSING OR BROKEN PARTS, OR IF
YOU ARE HAVING DIFFICULTY INSTALLING
THIS MOUNT TO YOUR WALL OR FITTING
YOUR TV, PLEASE CONTACT OUR COMPANY,
LEVEL MOUNT, DIRECTLY.
Dial 1 888 229 1459 or email us at
[email protected] any time of
the day or night for a quick and efficient solution
to your problem.
Our trained Customer Service Department is
open 24 hours a day, 7 days a week, every day
of the year and is prepared to assist you in both
English and Spanish.
Please also visit our Web Site at www.
LevelMount.com for assistance.
CAUTION:
Installer must make sure the LCD/Plasma
Wall Mount is properly and securely attached
and that appropriate fasteners are used. It is
the responsibility of the installer to verify that
the mount is anchored properly to the wall.
PLEASE NOTE: THE MOUNT MUST BE
ATTACHED TO WOOD STUDS OR TO
PROPERLY INSTALLED LEAD ANCHORS IN
MASONRY OR CONCRETE. DO NOT MOUNT
ONLY TO DRYWALL.
Before installing, check to make sure all parts
of the mount are included.
Make sure never to exceed the maximum
weight of 100 lbs.
Make sure all screws and bolts are tightened
before allowing Wall Mount to bear the full
weight of the LCD/plasma display.
Mounting Hardware Included:
Bag Ref Description QTY
1
A M4X12/Bolts 4
B M4X20/Bolts 4
C M4X30/Bolts 4
D M4 Lock Washers 4
2
E M5X30/Bolts 4
F M5X12/Bolts 4
G M5X20/Bolts 4
H M5 Lock Washers 4
3
I M6X35/Bolts 4
J M6X24/Bolts 4
K M6X12/Bolts 4
L M6 Lock Washers 4
4
M M8x40 bolts 4
N M8X25/Bolts 4
O M8 Lock Washers 4
5
P M4/M5 Spacers 4
Q M6/M8 Spacers 4
R WashersΦ20XΦ5.5X1.2 4
6
S Lag Bolts 3
T WashersΦ38XΦ6.8X1.5 3
U Hex wrench 1
V Concrete Anchor
Φ12.5X44.5
3
Features:
• Integrated Bubble Level
• Durable Steel Construction
• Easy 2 Piece Mounting
• Tilts 15 degrees, Pans 30 degrees
• Locking
Lever
• Stud Finder Included
AC
Adapter
SMM-08
Mount
LCD/Plasma
Mounting Arm
Remote
Control
Installation
Hardware
Stud Finder
Tools required for attachment to stud:
Hex Wrench (Included) •
Stud finder (Included) •
Electric drill •
3/16” Wood Drill Bit •
Tools required for attaching to concrete:
Hex Wrench (Included) •
Electric drill •
1/2’’ (12 mm) Masonry Bit •
www.LevelMount.com
1-888-229-1459
©2008 Level Mount
Patents Pending
! CAUTION
This wall mount was designed
specifi cally to hold LCD TV’s 10” - 42” and a
maximum weight of up to 100 lbs. Using this
product with a TV heavier than the maximum
weight may result in injury.