Liquid Controls SP3850 User Manual

Page 41

Advertising

SP3850 Flow Computer

Sub-menus

Display

Notes

ENTER

6.3.19
SERIAL USAGE
(RS-232/485)

ENTER

SERIAL USAGE

SERIAL HARDWARE
RS232 RS485

DEVICE ID
##

BAUD RATE
300 600 1200 <more>

BAUD RATE
2400 4800 9600 19200

PARITY
None Odd Even

HANDSHAKING
None Softwre Hardwre

DEVICE LINE FEED
<CR> <CR+LF>

MODEM OPTIONS
No Yes

MODEM INIT MASTER
No Yes

MODEM AUTO ANSWER
No Yes

CALL OUT DAY OF WEEK
1

CALL OUT TIME
##:##:##

Continued on Next Page

Press Enter to begin setup of the Serial Port.

Select Serial Hardware type for standard port.
Select RS485 only on special order. (See
SETUP NETWORK CARD for RS485 Modbus
option)

Select the Device ID.

Select the desired Baud Rate.

(If <more> selected)

Select the desired Parity.

Set the Handshake.

Choose end of line termination. Only choose
<CR> if your external device automatically
assigns a line feed for every <CR> carriage
return.

Select "Yes" if the serial port will be used to
control a modem.

Select "Yes" to have the unit engage in a
configuration conversation with the modem on
power up .

If "YES" selected for Modem Init Master,
choose the desired Modem Auto Answer
mode.

Enter the day of the week to perform Call Out
transmission. (0 = daily, 1 - 7 = Mon - Sun)

Enter the time of day to perform Call Out
transmission. (HH:MM:SS)

ENTER

6.3.20
SERIAL USAGE
(Modem Options)

Advertising