Magnum Venus Plastech Pro Gun CPD_PRTM - 1:1 - Manual (Page 20)

1:1 Classic Pro Gun Manual
Rev. 05/2012 Page | 20
Remove & Disassemble Flush Valve Assembly
1. Unscrew the flush valve body from the gun block.
2.
Remove the split seal from the flush valve body.
3.
Remove the flush valve body from the flush valve neck.
4.
Remove the flush valve seal from the flush valve body.
Note: For systems without Auto/Manual flush assemblies skip steps 5 - 7
FLUSH BODY
PUSH STEM
O-RING
BACK-UP RING
GRIP RING
SPRING
FLUSH VALVE BODY
HOSE CLAMP
BARBED FITTING
SEAL
5. Unscrew the auto/manual flush body assembly from the flush valve body.
6. Remove the grip ring from the push stem of the auto/manual flush body assembly.
Use caution not to lose the spring in the flush body.
7. Remove the back-up ring and o-ring from the push stem.
8.
Unscrew the flush seal body (5104-23-1) from the flush valve button (5104-25-01).
9.
Remove the spring (9203-2-3).