Turn the power off to the sd, Reconnect the serial cable to the xyp, Luminex 100/200 analyzer firmware upgrade – Luminex LDS 1.7 SP1 to xPONENT 3.1 Rev 2 Upgrade Instructions User Manual

Page 13: Turn on the power to the analyzer

Advertising
Turn the power off to the sd, Reconnect the serial cable to the xyp, Luminex 100/200 analyzer firmware upgrade | Turn on the power to the analyzer | Luminex LDS 1.7 SP1 to xPONENT 3.1 Rev 2 Upgrade Instructions User Manual | Page 13 / 16 Turn the power off to the sd, Reconnect the serial cable to the xyp, Luminex 100/200 analyzer firmware upgrade | Turn on the power to the analyzer | Luminex LDS 1.7 SP1 to xPONENT 3.1 Rev 2 Upgrade Instructions User Manual | Page 13 / 16
Advertising
See also other documents in the category Luminex Software: