Luminex LDS 1.7 SP1 to xPONENT 3.1 Rev 2 Upgrade Instructions - Manual (Page 10)

Luminex LDS 1.7 SP1 Upgrade Instructions to xPONENT 3.1 - For In Vitro Diagnostic Use
6
3. Double-click the Add/Remove Programs icon. The
Add/Remove Programs dialog box opens.
4. Under the Currently installed programs list, select the
Luminex Data Collector entry. The entry expands to include the
Change/Remove button. Click Change/Remove.
5. The InstallShield Wizard dialog box opens. Select Remove and
click Next.
6. Click OK in the Confirmation File Deletion dialog box.
If a Shared File Detected dialog box opens, select the Don’t
display this message again checkbox, then click Yes.
If a Self-registration error dialog box opens, Click OK.
7. When the InstallShield Wizard—Maintenance Complete
dialog box opens, click Finish.
8. Close the Add/Remove Programs dialog box and Control
Panel.
9. If the LMAT and the Luminex Data Collector icons are still
present on the desktop, drag the icons to the Recycle Bin.
Install Luminex
xPONENT 3.1 SP1
Software
Luminex xPONENT 3.1 SP1 includes the data conversion utility,
xCONVERT, which requires a separate installation.
To install the software:
1. Click Install xPONENT to begin installation of xPONENT 3.1
SP1.
2. An Internet Explorer dialog box opens with the following text:
Active content can harm your computer or disclose personal
information. Are you sure that you want to allow CDs to run
active content on your computer? Click Yes to continue.
Note: Steps 2, 3, and 4 may not
occur in all installations. 3. A File Download – Security Warning dialog box opens with the
following text: Do you want to run or save this file? Click Run to
continue.
4. An Internet Explorer – Security Warning dialog box opens
with the following text: The publisher could not be verified. Are
you sure you want to run this software? Click Run to continue.
5. An InstallShield Wizard dialog box opens. Click Install to
continue. The installation continues, displaying progress bars.
This may take several minutes.
6. The computer opens a Luminex xPONENT 3.1 SP1
InstallShield wizard. Click Next to continue.
7. At the next dialog box, select I accept the terms in the license
agreement and click Next.
8. A Database Server dialog box opens. Click Next to continue.
Note: If you purchased a new
PC from Luminex as part of the
upgrade, you do not need to
perform these steps. xPONENT
3.1 SP1 software is already
installed.
Note: At this point (step 5) in the
installation, the PC may reboot. If
the InstallShield wizard fails to
appear after rebooting, ensure the
user is logged in as admin or as a
user with installation privileges,
and manually run (setup.html)
again from the DVD. To run the
setup file manually, open the PC
directory structure and located
the DVD drive. Open the
directory on that drive. Locate
and click set.up.html.You will see
dialog boxes similar to steps 2-4;
follow the same instructions to
continue the installation.