Luminex xPONENT 3.1 Rev 2 (IVD) - Manual (Page 48)

FIGURE 25. Reports Tab
Report and Type lists. Choose a report from one of the following categories:
• Batch Reports - A list of batches appears below the Type list. The list includes Name,
Protocol, Protocol Version, Date, Status, and User information. Select a protocol and
then click Generate to generate the report.
• Calibration and Verification Reports- Displays a list of calibrations and verifications.
Choose from the following selections:
• CAL1
• MagCAL1
• CAL2
• CON1
• MagCON1
• CON2
Select a calibration component, a date from the Date list, and click Generate to generate
the report.
Performance Verification Reports - Displays two report types. Choose either of the
following:
• Condensed
• Detailed
Select a report type, a date range from the Date list, and click Generate to generate the
report.
xPONENT ® 3.1 Rev. 2 Software User Manual
38
For In Vitro Diagnostic Use