MAX GS865E - Manual (Page 14)

14
Green LED Red LED Status Description
1.
2.
3.
4.
5.
6.
HOW TO USE THE CHARGER
The special purpose charger JC610M has the LEDs (green, red) which indicate the status of the charger
and Battery.
The following cases are considered to be the troubles. Replace the charger and Battery with new ones.
● The green LED is not turned on if the power plug of the charger is plugged into a 100-240 V AC (for
household use) plug socket. (With the Battery unset)
※ Check with another electric appliance to see whether electricity is available at the plug socket.
● Neither green nor red LED is turned on or blinks if the Battery is set in the Charger.
● The green LED is not turned on 150 minutes after the red one has been turned on.
● The red LED is not turned on if the Battery is set in the charger.
Troubles of Charger and Battery
○ ON ● OFF Power-on
The charger has been plugged in. (Power-on status:
Battery unset)
● OFF ○ ON Charging The Battery is being charged.
○ ON ● OFF Charge Completed The Battery has been completed charged.
Blinking Blinking
High temparature
alarm
The Battery is hot. (Remove it from the Charger and
cool it down for a while before charging.)
○ ON ○ ON Battery alarm The Battery is defective. (Replace it with a new one)
Blinking ○ ON
Battery high
temparature alarm
The Battery is defective and hot. (Replace it with a
new one.)