MAX GS865E - Manual (Page 24)

24
9. TROUBLE SHOOTING/REPAIRS
q The repairs shall be carried out only by the MAX CO., LTD.authorised distributors.
w The tool is provided with a pin remover to ensure that the jamming pins can be easily removed.
WARNING:
● Remove the Fuel Cell, followed by the Battery.
Procedure
q Remove the Fuel Cell, followed by the Battery.
w Remove the pins remaining in the magazine.
e Manually pull up the Pin Removal Lever located on the front of the nose.
r Open the Driver Guide and remove the jamming pins.
t Hook the Driver Guide onto the two lugs of the nose and push back the pin removal
lever.
● Push back the pin removal lever properly until it has clicked.
Improper pushback results in fly-out of pins, jamming pins or no-load shot,
causing a danger.
WARNING:
Pin Removal
Lever
Driver Guide
2 Lugs