MAX RB217 - Manual (Page 21)

21
0 Tool feeds the wire about 6" (150 mm) and
cuts the wire automatically.Remove the cut
end of the wire with pliers.
a Unlock the Trigger before using the tool.
2. How to remove the Tie-Wire
• Be sure to turn the Main switch OFF, lock
the Trigger, and remove the Battery pack.
1 Press the release lever, and confirm that the
release lever is caught in the release stop-
per.
2 Remove the Tie-Wire from the wire guide.
RB217 RB517
Trigger
Trigger lock
LOCK
OFF
WARNING
Release Stopper Release Lever
Wire guide
Tie-Wire