MAX LM-380A - Manual (Page 16)

LOADING THE CONSUMABLES
16
3. LOADING THE CONSUMABLES
Follow the steps bellow.
(1) Installing the ink ribbon to the ink ribbon case.
(2) Loading the tube or tape.
(3) Loading the ink ribbon case.
3-1 INSTALLING OR REPLACING THE INK RIBBON
Note: Use a ribbon case (LM-RC310) for LM-380A.
Don’t use a ribbon case (LM-RC300) for LM-370A.
1. Install a new ribbon to the ribbon case.
2. While pressing “Button A,” set the
winding core (black) as shown in the
figure. Then, release “Button A” to lock
the ribbon.
Name of each section
Top
(Transparent)
Bottom
Ribbon case
Winding core
(Black) Ribbon core (Green)
The side with letters comes the top.
Button B
Button A
Insert
Press
Release
Button B
1. While pressing “Button B,” set
the ribbon core (green) as
shown in the figure. Then,
release the “Button B” to lock
the ribbon.
Pay attention to the top and bottom of ribbon case.
Button A
Press
Release
Insert