MAX LM-380A - Manual (Page 2)

BE SURE TO READ
2
WARNING
• Never disassemble or remodel the machine –– it can cause a fire, electric shock, or
trouble.
• Do not put any foreign substance, such a finger, pen, or wire, inside the machine
–– it can go out of order or cause a fire or electric fire.
• Obtain power directly from an electric outlet. Do not put many loads on one electric
outlet –– it can cause a fire.
• Never put a heavy substance on a power cord –– the cord can be damaged, leading to
a fire or electric shock.
• Do not disconnect/reconnect a power plug with a wet hand –– you could receive an
electric shock.
• Take care not to splash water or chemicals over the machine. If any liquid should
somehow get inside the machine, disconnect the power plug immediate from the
electric outlet, and contact our dealer for repair. If the machine is used in that state, it
can go out of order or cause a fire or electric shock.
• Do not use a machine that is out of order. If used in such a state as, for example, when
emitting smoke or an abnormal sound or peculiar odor, it can cause a fire or electric
shock. Disconnect the power plug immediately from the electric outlet, and contact
our dealer.
CAUTIONS
• Data cannot be stored permanently in the memory card and the internal memory.
Please note that we are not responsible for damages and lost profits resulting from data
loss attributable to battery consumption, problems, repairs, etc.
• Do not share the electric outlet with equipment (air conditioner, refrigerator, microwave,
office automation equipment, etc.) that requires a large capacity –– the voltage drops
and the machine can malfunction.
• Do not spread or put paper or cloth on the machine –– it can cause a fire or trouble.
• Never lick the ink ribbon, tubes and tapes.
• When the machine will not be used for a long time period, due to consecutive holiday,
etc., disconnect the power plug from the electric outlet, for safety.
• When connecting a cord or inserting/removing the memory card, be sure to turn off the
power beforehand. If the power is not turned off, an injury or trouble may result.
• Clean the power plug periodically. Otherwise, it becomes dusty over time and can
cause a fire or trouble.
• When disconnecting the power plug, do not pull the power coed. Hold and pull out the
power plug. Otherwise, the power cord can be broken and can cause a fire or electric
shock.
• Use only specified AC Adapter appended to the machine.
• Never touch the printer head. It is very hot just after printing.
• Never touch the cutter part (the blade of Half-cutter and Full cutter) of the instrument.