Micromod Micro-DCI: 53ML5100A LOADING STATION - Manual (Page 33)

3.4 FRONT PANEL PUSH BUTTON ALTERNATIVES
There are three alternative methods other than the front panel push buttons for accessing and
changing database parameters. All three methods to display and/or alter database parameters are
listed as follows:
1. Using a personal computer running the Micro-Tools configuration program that is sup-
plied as part of the 53 MT60 00 software package.
2. Using a personal computer running the Super32 configuration program that is supplied as part of
the 53 SU6000 software package.
3. Using the Hand Held Configurer (or any ASCII RS-232 terminal) connected to the
configuration port DIN plug on the front panel of the instrument. This procedure, using
the Hand Held Configurer, is described next in the remainder of this section.
Figure 3-11 illustrates the Hand Held Configurer and PC DIN plug cables necessary to configure an
instrument for the three alternative methods described. The PC cable type (9 pin or 25 pin) is de-
pendent upon the PC communications connector.
53ML5100 Manual Loading Station
3-10