Figure 7-2. ratio (pid) controller block diagram – Micromod Micro-DCI: 53SL5100A Single Loop Controller User Manual

Page 84

Advertising
background image

Single Loop Process Controller Instruction Manual

76 Ratio PID Controller

As illustrated in

Figure 7-2

, Ratio (PID) Controller Block Diagram, when a 3 is loaded into System Module

datapoint B00 to indicate CS3, the signal designators are as follows:

1.

ANI0 = Controlled Variable

2.

ANI1 = Wild Variable

3.

ANO0 = Controller Output

4.

CCO0 = Process Alarm

✎ Procedure
Note

To minimize sudden process changes, adjust the local setpoint
value to cause the setpoint pointer to cover the ratio tick bar before
switching to ratio control (Ratio).

Figure 7-2.

Ratio (PID) Controller Block Diagram

Advertising