Micromod MOD: 30ML and Modcell Totalization Application Guide - Manual (Page 4)

Using The Totalizer Block
Introduction
2
INTRODUCTION
SCOPE
This book is one of a series that discusses the application of MOD 30ML™ to commonly
encountered process control applications. This particular book discusses how to implement the
totalizer block in MOD 30ML.
Included in this publication is a functional description and configuration instructions for a typical
application using a totalizer block in a PID application.
FIRMWARE VERSIONS
The application example in this book is applicable to MOD 30ML firmware Version 2.0 and
above.
RELATED INFORMATION
Before actually configuring an instrument, you should be familiar with the information contained in
the following publications:
•
IB-1800R-OPR: MOD 30ML Multiloop Controller Operation Guide
•
IB-1800R-APP: MOD 30ML Functions Data Base Reference Guide
•
IB-1800-INS: MOD 30ML Multiloop Controller Installation Guide
or
•
IB-1800-M30: MOD 30ML Multiloop Controller Replacement for MOD 30 Instruments
Installation Guide
•
IB-23G602 (Issue 3 or later): Logic Functions Book 2 (Section 8.10, Totalizer)