Instructions, Part 1, 2 instructions – Micromod MOD: Extended Modbus (XModbus) OPC Server Users Guide User Manual
Page 16: 1 part 1
Extended Modbus OPC Server
Application Tutorial
3.2 Instructions
3.2.1 Part
1
1.
Launch the Extended Modbus OPC Server: From the Windows Start menu, select
Programs-ABB Control Solutions Software Suite - XModbus OPC Server.
• The OPC Server will launch as shown in the next figure.
• A blank tag database Untitled is opened by default.
We will add a device to this database. We will save this database later.
ABB Extended
Modbus OPC
Server
2.
Add a hardware device to the database: Click on the New XModbus Device button on
the toolbar or select Add-New XModbus Device from the menu bar at the top. This will
open the Extended Modbus Device Properties dialog box as shown in the figure below:
• We will configure the properties of the MOD 30ML device we are adding in this
dialog box.
3 - 2