Alliance Laundry Systems CHM160C - Manual (Page 16)

Operation
F232172 14 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Operating Instructions, Vend
Models Only
1. Turn on main power source (circuit breaker).
2. Push button and turn handle clockwise to open.
Refer to Figure 5.
Figure 5
3. Load to capacity whenever possible. DO NOT
OVERLOAD. Refer to Figure 6.
NOTE: Underloading can cause out-of-balance
conditions that can shorten machine life.
Figure 6
4. Close door and turn handle counterclockwise
until button pops out. Refer to Figure 7.
Figure 7
5. The default wash cycle will display. Refer to
Figure 8.
NOTE: Perm Press Cold is the default cycle if none
is selected.
Figure 8
U001I
U003I
U001I
U005I
CHM482R
CHM488R
To avoid personal injury, recommended
inlet water temperature should be no
higher than 125° Fahrenheit (51° Celsius).
W709
WARNING
CHM
WASH
ADD
BLEACH
RINSE
SPIN
DOOR
NORMAL
NORMAL
QUICK AS QUICK WASH
HEAVY SOIL DELICATE
RM RESS
PERM PRESS
HOT
WARM
HOT
HOT
WARM
COLD
WARM
COLD
START
PE P
W H
DOMESTIC MODELS
60C 60C
40C 40C
95C 95C
< <
30C
CHM488R
INTERNATIONAL MODELS