Minuteman E Ride 26 SPORT - Manual (Page 17)

17
Operating and Indicating Elements
Direction selector (Fig. 5/1)
Controls the direction in which the E
Ride 26 SPORT will move when the ac-
celerator pedal is activated. The arrow
pointing forward the amber LED (Fig. 5/
2) indicates the machine is in forward
mode. The arrow pointing backward
with the red LED (Fig. 5/7) indicates the
machine is in reverse mode.
Battery / Fault gauge(Fig. 5/3)
This gauge displays the remaining bat-
tery charge. This gauge also displays
any fault codes that might occur with
the machine controller (see “Trouble-
shooting” for fault codes).
Solution control(Fig. 5/4)
This control will adjust the amount of
solution that is dispersed to the floor
while in one of the scrub modes. Adjust
control clockwise to increase the
amount of solution being dispersed.
The solution flow range is from zero (0)
to a maximum of ¾ GPM.
Horn (Fig. 5/5)
Activates the electric horn.
Key Switch(Fig. 5/6)
The key switch turns the electrical sys-
tem on and off.
Remove the key to avoid unau-
thorized use of the machine.
Mode selector(Fig. 5/11)
Selects the operating mode of the ma-
chine.
Regular scrub mode(Fig. 5/9)
This mode is recommended for day-to-
day tasks under normal conditions.
With the direction selector in the for-
ward position and the accelerator pedal
is activated, the solution pump will turn
on, brushes will turn on and lower, vac-
uum motor will turn on and squeegee
will lower. When the accelerator pedal
is released and the machine stops mov-
ing, the scrub deck will automatically
raise and turn off the brushes, the
squeegee will raise and the vacuum
motor will turn off after a delay. If the di-
rection selector is in the reverse posi-
tion, the machine will operate the same
as in forward mode, only the squeegee
will raise up.