Maintenance and care – Minuteman E Ride 26 SPORT User Manual
Page 47
47
Maintenance and Care
7.5.1
Fill solution tank
Fill solution tank (Fig. 15/1) before work
or as required. Park machine on level
ground. Open fill port (Fig. 15/4) and fill
tank up to the maximum (1/1 marker) on
the sight gauge (Fig. 15/2).
7.5.2
Empty solution tank
Park machine such that the solution
tank drain hose (Fig. 15/5) is located
above the drain aperture in the floor.
Take tank drain hose from holder and
remove cap.
7.5.3
Solution Filter
Check solution filter (Fig. 15/3) at week-
ly intervals and clean or replace if re-
quired.
Only clean solution filter when
the solution tank is empty.
1. Empty solution tank (Fig. 15/1), see
paragraph 7.5.2.
2. Unscrew filter cap.
3. Remove the filter element from the
filter case for cleaning. Replace if re-
quired.
4. Re-install filter element and filter
cap.