Minuteman E Ride 26 SPORT - Manual (Page 21)

21
Operating and Indicating Elements
CB1 - Main Contol Circuit Breaker
Switch (Fig. 6/1)
Use this lever to turn on/off the main
controls of the E RIDE 26 SPORT.
CB2 - Auxiliary Circuit Breaker (Fig.
6/2)
This push button circuit breaker is used
to reset breaker control of the auxiliary
items on the E Ride 26 SPORT.
SPORT - Key Position III (Fig. 6/3)
When SPORT key is in positon III, the
brush speed will be 400 RPM, nominal.
SPORT - Brush Speed II (Fig. 6/4)
When SPORT key is in positon II, the
brush speed will be 300 RPM, nominal.
SPORT - Brush Speed I (Fig. 6/5)
When SPORT key is in positon I, the
brush speed will be 200 RPM, nominal.
Key Position - SPORT mode (Fig. 6/
6)
Key must inserted to select SPORT
mode (Brush Speed), I, II, or III. SPORT
mode selection will remain selected
with or without the key inserted. The
only way to select a different SPORT
mode (Brush Speed) I, II, or III, is to in-
sert the key and turn to a new mode se-
lection.
Remove the SPORT key to
avoid unauthorized Brush
Speed control selection.