Minuteman C46300-02 ET Extraction Tool - Manual (Page 8)

Parts and Instruction Manual
Page 4
OPERATING INSTRUCTIONS
1. Follow the operating instructions as
described in the “Gotcha!” (or the
Ambassador) Parts and Instruction
Manual.
2. Connect the vac/solution hose
assembly to the “Gotcha!” (see
fig. 1) or the Ambassador
(see fig. 2A).
3. Plug power cord into the receptacle
located at the lower back portion of
the machine. (see fig. 2 and fig. 2A).
4. For the brush and spray to operate,
the switch on the “Gotcha!” (see fig. 2)
must be on the double bar position
(vac & pump) or the Ambassador
“pump aux” switch must be on.
5. This tool is equipped with a 3-position
power switch. The single bar position
is for ”low” speed. The center position
is “off”. Double bar position for “high”
speed (see fig.1)
6. Minuteman recommends using the
“stiff” bristled brush for carpet and
the “soft” bristled brush for upholstery.
See fig. 5 for brush replacement
instructions.
WARNING:
DO NOT USE WITH THE
100 PSI MACHINE.
FIG. 1
FIG. 2
FIG. 2A