Minuteman E20 SPORT Walk-Behind Scrubber Disc Traction Drive - Manual (Page 25)

25
Machine Overview
Rear Squeegee
A Squeegee
B Star-shaped knob
C Adjusting screw for angle adjustment
D Suction hose
E Blade fastening latch
F Washers for caster height adjustment
G Caster Wheel Axle
Cleaning the Squeegee
Check the squeegee (A) daily and clean as
necessary.
1. Pull off the suction hose (D).
2. loosen the two star-shaped knobs (B).
3. Remove the squeegee (A).
Changing the Squeegee Blades
Check the inner and outer squeegee blades on
the squeegee (A) weekly for signs of wear.
The squeegee blades can be reused by turning
them (can be turned for 4 total uses).
1. Pull off the suction hose (D), loosen the two
star-shaped knobs (B) and remove the
squeegee.
2. Unlock the fastening device (E) and remove
the outer squeegee blade. Turn the squee-
gee blade or install a new one, as neces-
sary. Change the inner squeegee blade in the
same way.