Minuteman E20 SPORT Walk-Behind Scrubber Disc Traction Drive - Manual (Page 27)

27
Machine Overview
If streaks are present, despite an optimum
angle adjustment, the clearance between the
caster wheels and floor must be adjusted by
changing the number of washers underneath
the bracket that holds the wheel. The
squeegee height is preset at the factory to
2mm.
In cases of uneven smooth floors, e.g.
grouted tile, etc., see 3mm illustration for
washer configuration.
In cases of very uneven floors, e.g. poorly
laid tiles (water does not run off) ,, configure
as shown in 4mm illustration.
Keep the extra washers by
installing them above the bracket
as shown.
3 mm
2 mm 4 mm
Adjusting the Squeegee Blades
Height Adjustment