Minuteman E20 SPORT Walk-Behind Scrubber Disc Traction Drive User Manual
Page 39
Advertising
39
Troubleshooting
Not used.
The controller is being inhibited from driving,
this may be because the battery charger is
connected.
The bail handle was activated prior to turning
the machine on. Make sure that the bail handle
is in the rest position. Restart the key switch.
A controller fault is indicated. Make sure that
all connections are secure.
Not used.
An excessive voltage has been applied to
the controller. This is usually caused by a
poor battery connection. Check the battery
connections.
Advertising