Minuteman E17_E20 Electric Walk-Behind Scrubber Disc Brush Drive - Manual (Page 13)

13
Machine Overview
A B
D
C
The optional solution solenoid, which shuts off solution flow when the bail handle is released, is protected from debris by the in-line filter
assembly. The filter assembly is located at the rear of the machine on the left hand side, just under the solution tank. It is important to check and
clean the screened washer inside the assembly regularly to ensure proper solution flow. To open, unscrew the assembly (Note that the cone of
the washer is facing out toward the rear of the machine). Remove washer and rinse, reinsert and screw assembly together, tightening by hand.
Overtightening with tools may damage the plastic threads.
A Fitting, MGHT
B Screened Washer
C Hose Barb Insert
D Fitting, FGHT
In-Line Solution Filter Assembly
Optional Solution Solenoid
Minuteman offers an optional solution solenoid for the
E17/E20. The optional solenoid automatically turns off
the solution flow when the brush motor is not active.
Kit# K-E1720S