Minuteman E17_E20 Electric Walk-Behind Scrubber Disc Brush Drive User Manual
Page 27
27
The E17/E20
This machine was designed with total operator comfort and ease of use in mind. All machine components have been designed as a total
system to efficiently clean dirty floors. The E17/E20 has two available scrub head types and sizes to fit specific applications. Please
contact your Minuteman representative for specific recommendations for the correct scrub head type, size, and brush type and chemical
applications.
Before using the machine, always perform the following steps to ensure proper machine operation:
•
Check under the machine for leaks.
•
Check the rear squeegee for wear and damage.
•
Check the solution and recovery tank levels.
After using the machine, always perform the following steps:
•
Check for wire, string, or twine wrapped around the scrub brushes.
•
Check the rear squeegee for wear and damage.
•
Check the rear squeegee suction hose for obstructions.
•
Drain and clean the recovery tank and drain hose cap.
•
Check under the machine for leaks.
•
Check the service records to determine maintenance requirements.
WARNING!
- Be sure you understand the machine controls and their functions.
- While on ramps or inclines, avoid sudden stops when tanks are filled.
- Avoid abrupt sharp turns. Slow down driving speed when going downhill.