Minuteman E17_E20 Electric Walk-Behind Scrubber Disc Brush Drive User Manual
Page 7
7
Inspection
Carefully unpack and inspect your E17/E20 Walk-Behind Scrubber for shipping damage. Follow unpacking instructions on
shipping pallet. Each unit has been tested and thoroughly inspected before shipment. Any damage is the responsibility of the
delivery carrier who should be notified immediately.
Electrical
This machine is electric and designed to operate on 115 or 230 volts based on model.
Operator Responsibility
Read this manual carefully before operating this machine.
The operator is responsible for taking care of the daily maintenance of the machine to keep it in good working condition.
The operator must inform the service mechanic or supervisor when the scheduled maintenance intervals are required as
stated in the MAINTENANCE section of this manual.
Before starting, familiarize yourself with the machine and its controls (see “Machine Overview, Front”, “Machine Overview,
Rear”, “Control Console” diagrams).
Unpacking Instructions