Minuteman Phenom L1518 Dual Motor Upright Vacuum - Manual (Page 12)

12
Operation
2 Operation
2.1 Assembly
For transportation reasons, the shaft,
suction hose and brush head are not
assembled. Proceed as follows to
assemble these parts:
1. Insert the shaft (Fig. 2/3) in the
opening at the top of the vacuum
cleaner and press down until the
locking mechanism (Fig. 2/4)
engages.
2. Insert the suction hose (Fig. 2/2) in
the top of the vacuum cleaner.
3. Insert the intake pipe (Fig. 2/1) at the
bottom of the vacuum cleaner.
4. Insert the vacuum cleaner in
accordance with Fig. 2 on the brush
head (Fig. 2/5) and slide the lock
(Fig. 3/6) to the left "CLOSE".
Fig. 2
Fig. 3
1 Intake pipe
2 Suction hose
3 Shaft
4 Locking knob
for shaft
5 Brush head
6 Locking mechanism
2
3
1
5
4
6