Saniwares b c – American Standard Plumbing Product User Manual

Page 2

Advertising
background image

6

7

730864-100

AMERICAN STANDARD ONE-YEAR LIMITED WARRANTY

If inspection of this American Standard plumbing product, within one year after its initial installation, confirms that it is

defective in materials or workmanship, American Standard will repair or, at its option, exchange the product for a similar model.

This limited warranty does not apply to local building code compliance; since local building codes vary considerably, the

purchaser of this product should check with a local building or plumbing contractor to insure local code compliance before
installation.

This warranty shall be void if the product has been moved from its initial place of installation; if it has been subjected to

faulty maintenance, abuse, misuse, accident or other damage; if it was not installed in accordance with American Standard's
instructions; or if it has been modified in a manner inconsistent with the product as shipped by American Standard.

American Standard's option to repair or exchange the product under this warranty does not cover any labor or other costs

of removal or installation, nor shall American Standard be responsible for any other incidental or consequential
damages attributable to a product defect or to the repair or exchange of a defective product, all of which are
expressly excluded from this warranty.
(Some states or provinces do not allow the exclusion or limitation of implied
warranties, so this exclusion may not apply to you.)

This warranty gives you specific legal rights. You may have other statutory rights that vary from state to state or from

province to province, in which case this warranty does not affect such statutory rights.

For service under this warranty, it is suggested that a claim be made through the contractor or dealer from or through

whom the product was purchased, or that a service request (including a description of the product model and of the defect) be
sent to the following address:

In the United States:

American Standard, Inc.

One Centennial Ave.

Piscataway, New Jersey 08855

Attention: Director of Consumer Affairs

Toll Free: (800) 442-1902

In Canada:

American Standard, Inc.

2480 Stanfield Rd.,

Mississauga, Ontario

Canada L4Y 1S2

Toll Free: (800) 387-0369

In Mexico:

Customer Service Manager

American Standard, Inc.

Via Morelos #330

Col. Santa Clara

Ecatepec 55540 Edo. Mexico

Saniwares

B

C

Shut-Off
Valves

Connect supply line to faucet (finger tight) and carefully
bend tubes to engage with the supply shut-off valves.
Tighten connections at faucet and shut-off valves for
secure seal.

Connect trap to drain assembly hand tight to check alignment.
It may be necessary to cut off part of the tailpiece (area "B") or
part of the horizontal leg of the trap (area "C"). Secure joints for
watertight assembly.

Care & Cleaning Instructions:

Your new American Standard sink has been factory treated with today's next-generation Scotchgard™ Protector - a
clear, colorless, protective material designed to make ceramic bath fixtures easy to clean.

Scotchgard™ Protector repels liquids that can cause stains and makes soap scum, lime, rust and other soils easier to
clean away. In many cases simple wiping with a damp cloth or sponge is all that is required. For stubborn spots a mild
detergent or non-abrasive cleaner can be used.

NOTE: Do not use abrasive powdered or liquid cleaners or chlorinated bleaches which can damage the

protective treatment.

Advertising