Avaya Cajun P880 - Manual (Page 125)

Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink CLI Reference Guide, Version 2.0
Avaya ATM Uplink Module CLI Commands
1-115
nvram initialize
Command Mode
Configuration
Description
Initialize NVRAM (Non-Volatile RAM). This erases the contents of
NVRAM.
CAUTION
This command erases all configurations and sets the switch
back to factory defaults.
Syntax
nvram initialize
Example
This example would initialize the ATM Uplink module back to
factory default configuration.
ATM(configure)# nvram initialize
NV is initialized ... reboot to take effect.