Avaya Cajun P880 - Manual (Page 139)

Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink CLI Reference Guide, Version 2.0
Avaya ATM Uplink Module CLI Commands
1-129
set vport (max-vci)
Command Mode
Configuration
Description
Set the maximum Virtual Circuit Identifier (VCI) tag value for a
path.
* Note: You must disable a VPORT each time you make a change
to the configuration. After you make configuration
changes, you must enable the VPORT in order for the
changes to take effect.
Syntax
set vport <interfaceID> <vpiNumber> max-vci <vci-
value>
Table 1-79. Parameters, Keywords, Arguments
Sample Output
This example sets the maximum VCI for VPORT 1 5 to 22000.
ATM(configure)# set vport 1 5 disable
VPort 1 5 has been disabled
ATM(configure)# set vport 1 5 max-vci 22000
VPort 1 5 modified
ATM(configure)# set vport 1 5 enable
VPort 1 5 has been enabled
Name Definition
interfaceID The ATM Interface number. The range of
values is: Minimum = 1, Maximum = 2.
vpiNumber The VPI number. The range of values is:
Minimum = 0, Maximum = 255.
vci-value The maximum VCI value. The range of values
is: Minimum = 0, Maximum = 32767.