Main function – MIDLAND CT510 User Manual
Page 33
Instruction Guide Midland CT510
| 33
Main Function
• Dual band (VHF/UHF) and channel name displayed
• Frequency band:144-146MHz & 430-440MHz (Rx / Tx).
• Working mode: UHF-VHF, VHF-VHF or UHF-UHF
• Output power: 2W VHF / UHF
• 128 stored channels
• Scrambler
• Compander
• VOX function
• 212 DCS codes and 50 CTCSS tones
• “VOICE” function
• SOS emergency function
• Channel spacing selectable between 25kHz and 12,5 kHz
• Optional viewing on display display of channel number, channel
number + frequency or only frequency
• Inverted frequency function
• Scan
• FM radio
• Frequency step: 5 kHz, 6.25 kHz, 10 kHz, 12.5 kHz, 25 kHz, 37,5 kHz,
50 kHz, 100 kHz
• Selectable tx power: high or low
• Li-Ion battery pack 1300mAh
• Frequency Offset: 0-69.950 MHz
• Shift repeater
• BCLO (Busy Channel Lock Out) function
• Roger Beep tone at start/end transmission
• TOT (Time out timer)
• Keypad lock
• Frequency scan with CTCSS/DCS
• Priority scan
• DTMF
• Function/channel reset
• 1750 Hz tone for repeaters
• Accessory jack: 1 Pin 2,5mm