Multichannel Systems USB-MEA32-STIM4 Manual - Manual (Page 34)

USB-MEA32-STIM4 Manual
28
5.2 MC_Stimulus: Stimulation Control
The twelve stimulation electrodes can be connected via software control to the four channels of
the internal stimulus generator. The internal stimulator generates current controlled pulses only.
Selection of the stimulation electrodes and programming of the stimulation pulses is done either
with MC_Stimulus II or with the LTP-Director. Please read the respective manuals / helps for
more information.
5.2.1 Device Setup
Start MC_Stimulus II.
In Settings menu of the main menu toolbar, select “STG Device Setup”. The “STG Settings” dialog
appears. Click radio button MEA32-STIM4. Restart MC_Stimulus II for the settings to take effect.
In STG menu of the main menu toolbar, please click “Select Device”.