Multichannel Systems USB-MEA32-STIM4 Manual - Manual (Page 35)

Recording and Stimulation
29
The “Select Device” dialog appears. Please select the USB-MEA32-STIM4 device you want to
connect to by the serial number. Like MC_Rack, MC_Stimulus II can also be opened several times
at once. Open one instance of MC_Stimulus II for each USB-MEA32-STIM4 device
connected to the computer and assign each instance to one device. All available stimulation
devices are listed by their serial numbers.
5.2.2 Selection of Stimulation Electrodes
Select the stimulation electrodes in main menu Edit "Channel Select".
It is possible to assign stimulation channel 1 and 2 to stimulation electrodes S 1 to S6. It is not
possible to select the same electrode for both channels. Stimulation electrodes S 7 to S 12 have
to be assigned to channel 3 and 4. If you do not need four channels for stimulation, click check
box "channel off".
Warning: Please switch off all unused stimulation channels, even if no stimulation pulse
is programmed.