Diamond Products CG-2 Mini Groover - Manual (Page 3)

Table of Contents
Safe Operations and Precautions…………...…2-6
Dimensions………………………………………….7
Dash Layout & Operational Controls…………….8
Operating The CG-2……………...……………9-15
Maintaining The CG-2………..………………16-25
Frame & Guards Assembly……………...…..26-27
Instrument Panel Assembly……………………..28
Control Lever Assembly………………………....29
Control Grip Assembly…………………………...30
Blade Shaft Assembly………………….…….32-32
Lift Plate Assembly……………………….……...33
Drive Axle Assembly………………………….….34
Transmission & Drive Gear Assembly……..35-36
Engine & Exhaust Assembly……………….…...37
PTO Assembly…………………………………....38
Air Intake Assembly ……………………………..39
Positraction Engagement Assembly……………40
Depth Stop Assembly…………………………....41
Hydraulic Pump Assembly………………………42
Battery Assembly………………………………...43
Fuel Tank And Supply Assembly……………….44
Water Supply Assembly…………………………45
Transmission Jack Shaft Assembly……………46
Guide Wheel Assembly…………………………47
Transmission Belt Tensioner Assembly………48
Front Pointer Assembly…………………………49
Parking Brake Assembly……….……………….50
Belt Location Assembly…………………………51
Maintenance Record….…………………….52-53
Warranty Information……………………………54
Safety Precautions
Operate the CG-2 Mini Grooving machine and all of
its components according to this manual. Failure to
comply with and have understanding of the following
safety, operations, and maintenance instructions
may result in serious injury or death. All operators
must be properly trained or supervised by
experienced personnel prior to operating the
machine and should be familiar with the risk and
hazards involved with its operation. Improper or
unintended machine usage is discouraged and
Diamond Products cannot be held liable for
damages.
Any and all machine modifications should be made
by Diamond Products to ensure safety and design.
Any modifications made by the owner(s) are not the
responsibility of Diamond Products and void all
warranties is problems arise from modifications.
Refer to the CG-2 Mini Grooving Machine parts list
for additional information and parts diagrams.
Replace parts with only those found in the parts list.
NOTICE: The information in this manual may
be updated at anytime.
Safety Alerts
Serious Injuries and/or death will occur if these
instructions are not followed.
Serious Injuries and/ or death will occur if these
instructions are not followed.
Mild and/or moderate injuries may occur is
these instructions are not followed.
1