Diamond Products CG-2 Mini Groover - Manual (Page 34)

CG-2 MIni Groover Blade Shaft Assembly
NOTE: BLADES ARE NOT INCLUDED.
ITEM
NO.
PART
NUMBER
Description
Defa
ult/Q
TY.
1 2705403 Bearing, 1-7/16" Pillow Block 2
2 6082007 Blade Shaft, CG-2 1
3 6030317 Blade Flange 1
4 6078034-1 Key, 3/8" Sq. x 5/8" 1
5 6091574 Threaded Rod, 3/4"-10 x 18.625" 4
6 2500440 Sheave, 8" x 10 Groove QD Style 1
7 6075416 Blade Cover Weldment 1
8 6075414 Blade Cover Side Mount Weldment, Right 1
9 6075415 Blade Cover Side Mount Weldment, Left 1
10 6091589 Outer Bearing, Blade Cover, Top 2
12 2900062 Grease Fitting, 1/8" NPT 2
13 2503351 Locking Spring Plunger, L-Handle 1
14 6010230 Shaft Tach Gear 1
15 2903091 1/2-13 x 3.00" Hex Head Cap Screw 4
16 2900058 1/2 FLAT WASHER 8
17 2900026 1/2-13 Nylon-Insert Hex Locknut 4
18 6079262 CG-2 Blade Side Splash Shield 2
19 6079263 CG-2 Water Shield Side Strip 2
20 2903018 3/8" Flat Washer 8
21 2900018 Lock Nut, 3/8-16 Nylon 8
22 2506550 Bushing, QD, SF 1-7/16" 1
23 2903134 3/4-10 Hex Nut Hex Nut 8
24 7600292 Sleeve, Tach Gear 1
26 2900080 3/8-16 x 2.00" Hex Head Cap Screw 3
27 2900006 3/8 SPLIT LOCK WASHER 3
28 2900142 5/16-10 x .375" Cup Point Set Screw 1
29 2503468 CG-2 Blade Sheave Key 1
32 2504720 1/2-13" Hoist Ring 1
32