Diamond Products CG-2 Mini Groover - Manual (Page 4)

Safety Precautions
Operate the CG-2 Concrete Groover/Grinder and all
of its components according to the Diamond
Products owner manual. All operators must be
properly trained or supervised in order to operate
this machine and understand the inherent risk and
hazards involved. Improper or unintended saw
usage is highly discouraged and Diamond Products
cannot be held liable for any damages.
Any and all saw modifications shall be made by
Diamond Products to ensure proper safety and
engineering. Modifications made to the saw by the
current owner are not the responsibility of Diamond
Products, and void any and all warranties if
problems arise due to the modifications.
Failure to comply with and understand all safety,
operation, and maintenance procedures and
instructions provided in this manual can result in
serious injury and/or death. Any and all information
in this manual may be updated and changed at any
time.
Prior to operating the saw, record the saws serial
number and engine model number and serial
number in the Serial Tags section of this manual
for future reference.
Safety Alerts
Serious injuries and/or death will occur if these
instructions are not followed.
Serious injuries and/or death could occur if these
instructions are not followed.
Mild and/or moderate injuries could occur if these
instructions are not followed.
Proposition 65
Engine exhaust and some of its constituents are
known to the State of California to
cause cancer, birth defects, and or
other forms of repertory harm.
Respiratory Hazard
Concrete cutting and drilling produces dust and
fumes known to cause illness, death, cancer,
respiratory disease, birth defects, and or
reproductive harm. Safety protection techniques
include, but are not limited to:
• Wearing protective gloves.
• Wearing safety goggles or face shield.
• Using approved respirator.
• Washing work clothes daily.
• Using water when cutting to minimize dust.
• Washing hands and face prior to eating or
drinking.
For additional safety and self protection
information, contact your employer, the
Occupational Safety and Health Administration
(OHSA), and/or The National Institute for
Occupational Safety and Health (NIOSH).
Spark Arrest Requirements
In the State of California it is a violations of Section
4442 or 4443 to use or operate an engine on any
forest-covered, brush-covered, or grass covered
land unless the engine is equipped with a spark
arrestor, as defined in Section 4442, maintained in
effective, working order or the engine is
constructed, equipped, and maintained for
prevention of fire pursuant to section 4443.
2