Safety – Diamond Products CB700 Drill Motor User Manual
Page 2
SAFETY
1.
When operating the drill, be sure to wear proper safety gear, such as safety
glasses, dust mask, glove, and hearing protection. A hard hat is also
recommended.
2.
Never operate unless proper footing and balance is possible at all time.
3.
Wear proper apparel. Do not wear loose clothing or accessories. Keep hair
and body parts away from openings and moving parts.
4.
Wet coring bits MUST be used with water. Flow should be kept at sufficient
rate and volume.
5.
Use ONLY diamond impregnated core bits with this drill.
6.
Do not force the machine. Use the drill properly and as intended.
7.
Anchor bolts should always be used to secure the base on a cracked,
uneven or vertical surfaces.
8.
Maintain alertness while operating the machine. Failure to maintain
attention, by the operator, may lead to serious injury.
9.
Do no operate the machine when you are tired or while under the influence of
drugs, alcohol or any medication.
10. Use common sense when operating any power tool.
1