Diamond Products UDM - Manual (Page 24)

Appendix A
Serial Tags
Record the machine’s serial number below for future reference and customer service purposes.
Serial Number
Record the engine’s model and serial numbers below for future reference and customer service purposes.
Model Number
Serial Number
Appendix B
Daily Maintenance Task Chart
Table 1: Daily Maintenance Task Chart
Date
      
1.
Inspect belts for tension and wear.
Replace or re-tension as necessary.
2. Inspect machine for damages.
3. Tighten loose nuts, screws, and bolts.
4.
Check all fluid levels and fill as
necessary (fuel, water, hydraulic oil,
engine oil).
5.
Wipe down and clean machine to
remove dust, debris, and slurry from
components.
6.
Wipe down engine’s exterior and oil
cooler.
7. Look for fluid leaks.
8.
Check hydraulic oil filter gauge and
replace filter as necessary.
9.
Check water trap jars and clean as
necessary.
10.
Check tire pressure and add air as
necessary.
11. Check air cleaner (see engine manual).
12.
Inspect hydraulic hoses, couplings, and
fittings for leaks.
13.
Clean quick disconnects prior to
connecting hydraulic hoses.
14.
Inspect roller carriage and adjust as
necessary.
15. Refer to engine manual and manufacturer for daily engine care and maintenance tasks.
21