Diamond Products FZ-3S - Manual (Page 28)

6 Sawing
6.1 Before sawing
Never saw without blade
guard.
Pay attention to the following in-
structions:
•
Check the moving sense of the wall saw
head and the swivelling arm
•
The toothing of the track must be clean
•
Make a "trial run " along the whole length
of the tracks and make sure that the hoses
are not clogged
•
Cover sharp-edged objects along the
tracks to protect the hoses
•
Check whether all dowel bolts at the track
bases are firmly tightened
•
Check whether the water emerges properly
at the pivot of the saw blade
6.2 The first cut
Important:
- Sense of rotation with the feed sense
- Swivel arm must be drawn
- Cutting depth: 5 - 10 cm
- Only saw at half power
Procedure
•
Close the feed circuit valves at the power
unit
•
Drive the wall saw head to start position
•
Saw
Fig. fz6-1.tif
Thvt Aa"T
Page 28 FZ_39903